Dongguan Linkun Electronic Technology Co., Ltd.
Dongguan Linkun Electronic Technology Co., Ltd.
Add to Cart
Features Of The BMS Temperature Sensor
● Application description: High sensitivity and fast response speed
● Scope of application: New energy vehicle battery module BSM temperature collection
● High sensitivity and fast response speed
● It has good insulation and resistance to mechanical collision and strong bending resistance
● Fast response
● Aluminum housed
● Surface measuring
Specification Of The BMS Temperature Sensor
| Name | NTC Temperature Sensor |
| R25 | 10K OHM |
| B25/50 | 4150 |
| Tolerance | 1% |
| Housing material | Aluminum |
| Cable | XLPE,FEP,PVC |
| Operating temp | -40~+125 degree |
Real Product Images Of The BMS Temperature Sensor
New energy vehicle BMS thermal protection system: Leading solution for integration of anti-failure temperature sensor wiring harness
In addition to battery thermal runaway, overcharge and overdischarge, external short-circuit and internal short-circuit, mechanical reasons, high local temperature, and collision, it is also related to the lack of attention to the BMS temperature monitoring system in terms of design. Many domestic battery factories have drastically reduced the temperature in order to save costs. The number of sensors deployed and controlled makes the battery pack have a temperature monitoring blind spot.
The accelerated development of high specific energy, high nickel batteries and high rate rechargeable batteries is posing greater challenges to battery thermal runaway temperature and safety.
In addition to battery thermal runaway, overcharge and overdischarge, external short-circuit and internal short-circuit, mechanical reasons, high local temperature, and collision, it is also related to the lack of attention to the BMS temperature monitoring system in terms of design. Many domestic battery factories have drastically reduced the temperature in order to save costs. The number of sensors deployed and controlled makes the battery pack have a temperature monitoring blind spot.
At the same time, the selection and use of temperature probes have low sensitivity and long response time; unreasonable installation parts, glue bonding, displacement, temperature detection out of control, these will cause real-time delay and failure of BMS temperature monitoring, and it is impossible to detect the precursors of thermal out of control in time And early warning, timely power failure and timely handling, will cause the temperature to rise quickly and out of control in the later stage.
"Therefore, it is necessary to select a temperature sensor with high sensitivity, high precision of temperature control point, high measurement area, and low self-heating error."